+971 4 262 3337
قم بالتبديل إلى Dark Mode

ثيرمال تيك باسيفيك G1 / 4 PETG أنبوب ضغط OD 12 مم - أسود | CL-W143-CU00BL-A

الموديل: CL-W143-CU00BL-A
كود التخزين: 24289
الإبلاغ عن معلومات غير صحيحة أو غير ملائمة عن المنتج.

الإبلاغ عن معلومات غير صحيحة أو غير ملائمة عن المنتج.



معلومات ثيرمال تيك باسيفيك G1 / 4 PETG أنبوب ضغط OD 12 مم - أسود | CL-W143-CU00BL-A



Caution

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks
  1. To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  2. Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  3. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  4. Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup
  1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  4. Fill the reservoir to the top as it will prevent air from going into the pump
  5. If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  6. Place some paper towels under fittings and joining points to test for leaks.
  7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
  8. Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  9. Coolant might fade over time.
Thermaltake Pacific G1/4 PETG Tube 12mm OD Compression – Black


Finished in black coatings, the Pacific G1/4 PETG Tube 12mm OD Compression fitting is designed for use with solid PETG tubing. With high-flow and leak-free design, Thermaltake takes every detail seriously. Make your system a showcase for all to see with high quality components from Thermaltake.

TT Premium

To continue achieving the corporate mission of delivering the perfect user experience, Thermaltake developed “TT Premium” with the essence of combining supreme quality products with a new logo design. TT Premium is far more than just a guarantee of quality. Behind the name, it represents the passion in DIY, Modding and Thermaltake’s desire to be the most innovative brand in the PC hardware market. To satisfy the demand of the high-end PC users, TT Premium follows its core values of Excellent Quality, Unique Design, Diverse Combinations and Boundless Creativity to provide a high performance PC product for every enthusiast.

Tt LCS Certified

Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.



High-Flow and Leak-free Design

Committed to deliver the highest quality, the fitting includes three preinstalled O-rings and allows proper connection to G1/4” ports, securing properly to any cooling components while providing an even seal around the tubing. 

For tubes: 
- Outer diameter: 12mm 

Remarkable Expansion

Thermaltake offers a full line of Pacific Series components for enthusiasts to build up aesthetically-superior water cooling systems by incorporating externally-modular upgrades for their chassis.
قراءة المزيد

المواصفات ثيرمال تيك باسيفيك G1 / 4 PETG أنبوب ضغط OD 12 مم - أسود | CL-W143-CU00BL-A

جنرال لواء
العلامة التجارية
الموديل
  • CL-W143-CU00BL-A
كود تخزين مايكروليس
  • 24289
تاريخ متاح الأولى
  • 01 ديسمبر، 2018
وزن المشتريات
  • 0.10 كغ

قد تكون مهتما بالتالي



تقييمات المستخدمين ثيرمال تيك باسيفيك G1 / 4 PETG أنبوب ضغط OD 12 مم - أسود | CL-W143-CU00BL-A

0
لا يوجد تقييم
كن أول من يقيم هذا المنتج

أشكركم على التصنيف!
اكتب مراجعة كاملة.
اختر الصور