Description for Audio-Technica AT-VM95C Conical stereo cartridge, Aluminium cantilever, 4.0mV output Compatible body with all VM95, Replacement for AT91, AT91R and CN5625AL | AT-VM95C
AT-VM95C
VM95 series Conical stereo cartridge
The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL
Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.
- Aluminium cantilever
- 4.0mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- Replacement for AT91, AT91R and CN5625AL
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.
AT-VM95C
VM95 series Conical stereo cartridge
The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL
Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata.
- Aluminium cantilever
- 4.0mV output voltage
- Compatible body with all VM95 Series stylus assemblies
- Replacement for AT91, AT91R and CN5625AL
|
|
VM95 Series - Styli compatibility
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.
SPECIFICATION
Model |
AT-VM95C |
Type |
VM Stereo Dual Magnet |
Mounting |
1/2” centres |
Frequency Response |
20 - 20,000 Hz |
Channel Separation |
18 dB (1 kHz) |
Output Channel Balance |
2.5 dB (1 kHz) |
Output Voltage |
4.0 mV (@ 1 kHz, 5 cm/sec) |
Vertical Tracking Angle |
23° |
Vertical Tracking Force Range |
1.8 - 2.2g (standard 2.0 g) |
Stylus Shape |
Conical |
Stylus Size |
0.6 mil |
Stylus Construction |
Bonded Round Shank |
Cantilever |
Aluminium Pipe |
Coil Impedance |
3.3 kΩ (1 kHz) |
Coil Inductance |
550 mH (1 kHz) |
DC Resistance |
485 Ω |
Static Compliance |
17 x 10 – 6 cm / dyne |
Dynamic Compliance |
6.5 x 10 – 6 cm / dyne (100 Hz) |
Wire Used for Coil |
T.P. Copper |
Recommended Load Impedance |
47,000 Ω |
Recommended Load Capacitance |
100-200 pF |
Cartridge Weight |
6.1g |
Dimensions |
17.2 x 18.9 x 28.3 ( H x W x D mm) |
Replacement Stylus |
AT-VMN95C |
Accessories Included |
Two 11 mm installation screws; |
Specifications for Audio-Technica AT-VM95C Conical stereo cartridge, Aluminium cantilever, 4.0mV output Compatible body with all VM95, Replacement for AT91, AT91R and CN5625AL | AT-VM95C
- AT-VM95C
- 26110
- 08 May, 2019
- 0.20 Kg