|
|
Ubiquiti G2 Starter Kit Pro, Network Single Door Controller, NFC Card Reader with 1.2" Read Range, MIFARE 13.56 MHz Technology, 12MP Camera, IP55-Rated Readers, White | UA-G2-SK-PRO
Model:
G2 Starter Kit Pro
SKU:
140001
Copy link
Share via WhatsApp
Share via Facebook
Share via Email
Share via X
Share via Telegram
Share via Pinterest
Out of Stock
Notify Me When in Stock
Report incorrect or inappropriate product information.
Description for Ubiquiti G2 Starter Kit Pro, Network Single Door Controller, NFC Card Reader with 1.2" Read Range, MIFARE 13.56 MHz Technology, 12MP Camera, IP55-Rated Readers, White | UA-G2-SK-PRO
G2 Starter Kit Pro
Hit the ground running with Access, featuring a professional experience for a door with two readers.
Features
- 1 x UniFi Access Hub
- 1 x UniFi Access Reader G2 Professional
- 1 x UniFi G2 Reader, 2 x Pocket Keyfobs
- Network Single Door Controller
- Hub Powered by 802.3bt PoE++ Switch
- NFC Card Reader with 1.2" Read Range
- MIFARE 13.56 MHz Technology
- 12MP Camera
- Secured Entry via Keyfobs
- IP55-Rated Readers
Specifications
| UA-Hub-Door | |
| Mechanical | - Dimensions: 174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3") - Weight: 363 g (12.8 oz) - Enclosure material: Polycarbonate - Mounting material: Polycarbonate |
| Hardware | - Networking interface: (5) 10/100/1000 Base-T - Power method: PoE++, UL 294 Power-limited Class 2 PSU, UL 60950/62368 LPS/PS2 PSU - Max. power consumption: Without PoE output: 30W, With PoE output: 50W - PoE input: 50V DC, 1A - PoE output: PoE passthrough, (4) PoE, 50V DC, total 20W - Button: (1) Factory-reset - LEDs: System: white/blue, Output relays: white, Digital input: Request to exit/request to enter/remote release/door position sensor, Dry output relay: Lock: 30V DC, 1A, Aux: 30V DC, 1A, Powered output relay: Lock: 12V DC, 1A, Aux: 12V DC, 0.33A, 12V DC, 0.33A - Operating environment: Indoor use only - Operating temperature: 0 to 40° C (32 to 104° F) - Operating humidity: 5 to 95% noncondensing - UL 294 level: Destructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I - UL 294 statement: Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. - CAN/ULC-60839-11-1 Grade: Grade assignment: 1 - Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 - Document number, and issue date and/or revision level: UA-Hub-Door002, V01 |
| Wiring Information | - Wiring gauge requirements (AWG): Total length to device: Output load current at 12V DC 100mA: 6.1 m (20 ft) - 22 250mA: 6.1 m (20 ft) - 22 500mA: 6.1 m (20 ft) - 22 1A: 6.1 m (20 ft) - 18 15.2 m (50 ft) - 22 15.2 m (50 ft) - 22 15.2 m (50 ft) - 22 15.2 m (50 ft) - 18 30.5 m (100 ft) - 22 30.5 m (100 ft) - 22 30.5 m (100 ft) - 18 30.5 m (100 ft) - 18 - UACC-Cable-DoorLockRelay (18 AWG) is recommended - PoE cabling requirements: The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 24 AWG (0.21 mm2) for horizontal or riser cable. |
| LEDs | - PoE in: Steady blue: Adopted/device is ready, Steady white: Pending adoption, Blinking white/blue: Upgrading firmware - PoE out: Off: Not connected or no data link, Steady blue: Connected and data link on |
| UA-G2-Pro | |
| Mechanical | - Dimensions: 160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6") - Weight: 136 g (4.8 oz) - Enclosure material: Polycarbonate, glass - Mount material: Aluminum alloy - Mounting: Wall, gang box - Weatherproofing: IP55 |
| Hardware | - Networking interface: (1) 10/100/1,000 MbE RJ45 port - Connectivity: BLE 4.2, NFC - Power method: PoE - Supported voltage range: 48V DC - Max. power consumption: 6W - ESD/EMP protection: Air: ±15kV, contact: ±8kV - Sensor: ToF sensor - Camera: 4000 x 3000, 12 MP, 30 FPS - Microphone: Yes - Speaker: (1) 4 ohm, 1.5W - LEDs: R/G/B/W, Flash - Button: (1) Factory-reset - NFC frequency: 13.56 MHz - NFC read range: < 30 mm - NFC standards: ISO 14443A, 14443B, 15693 - NFC technology: NFC Tag 1,2,3,4,5, MIFARE Classic, MIFAREPlus, MIFARE Ultralight, MIFARE DESFire |
| Operating environment | - Operating temperature: -10 to 45° C (14 to 113° F) - Operating humidity: 5 to 90% noncondensing |
| Certifications | - Certifications: CE, FCC, IC |
| UA-G2 | |
| Mechanical | - Dimensions: 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") - Weight: 82 g (2.9 oz) - Enclosure material: Polycarbonate, glass - Mounting: In wall, gang box - Weatherproofing: IP55 |
| Hardware | - Networking interface: (1) 10/100 MbE RJ45 port - Connectivity: BLE 4.1 - Power method: PoE - Supported voltage range: 48V DC - Max. power consumption: 5W - ESD/EMP protection: Air: ±15kV, contact: ±8kV - Sensors: Proximity sensor - Speaker: (1) 8 ohm, 0.7W - LEDs: R/G/B/W - Button: (1) Factory-reset - NFC frequency: 13.56 MHz - NFC read range: < 30 mm - NFC standards: ISO 14443A, 14443B, 15693 - NFC technology: NFC Tag 1,2,3,4,5, MIFARE Classic, MIFAREPlus, MIFARE Ultralight, MIFARE DESFire |
| Operating environment | - Operating temperature: -30 to 45° C (-22 to 113° F) - Operating humidity: 5 to 90% noncondensing |
| Certifications | - Certifications: CE, FCC, IC |
| UA-Pocket | |
| Mechanical | - Dimensions: 84 x 39 x 7.4 mm (3.3 x 1.5 x 0.29") - Weight: 16 g (0.56 oz) - Enclosure material: Polycarbonate, stainless steel - Weatherproofing: IP54 |
| Hardware | - NFC frequency: 13.56 MHz - NFC technology: ISO/IEC 14443 Type A, MIFARE DESFire EV3 4K, UniFi Access Proprietary Security Protocol |
| Operating environment | - Operating temperature: -10 to 45° C (14 to 113° F) - Operating humidity: 10 to 90% noncondensing |
| Certification | - Certification: CE |
Specifications for Ubiquiti G2 Starter Kit Pro, Network Single Door Controller, NFC Card Reader with 1.2" Read Range, MIFARE 13.56 MHz Technology, 12MP Camera, IP55-Rated Readers, White | UA-G2-SK-PRO
General
Brand
Model
- G2 Starter Kit Pro
Microless SKU
- 140001
Date first available
- 04 January, 2024
Shipping Weight
- 1.85 Kg
Shipping Dimensions
- 8.50 cm x 36.00 cm x 21.01 cm
Reviews for Ubiquiti G2 Starter Kit Pro, Network Single Door Controller, NFC Card Reader with 1.2" Read Range, MIFARE 13.56 MHz Technology, 12MP Camera, IP55-Rated Readers, White | UA-G2-SK-PRO
×
Report an Issue
Videos for this product
